Jul 02, 2024
1. Specific Description:
The working principle of traditional waste plastic recycling extrusion granulation machine is to melt plastic through a single-stage and double-stage extruder, squeeze and push the plastic strip, and then cut the granules after cooling, drying and fixing.
2. The water ring/mist/underwater granulation unit has the following key technical features:
1. Since the plastic is scraped off by the blade in the dissolved state and then cooled by the circulation system cooling water
2. According to the extrusion rate
3. Cooling sink area
'Cut the grain.4-6-6.mm long cooling sink area, greatly reduced'.
4. Automation
5. The production capacity
Dvojica:
